|
OTR-200/600 Hot stamping machine special used
on the end face of plank/board |
Performance&use
The machine is mainly used for thermoprinting the both end faces of solid wooden floor and intensified floor.
Technology parameter
|
blanking width |
200 |
600 |
|
blanking speed |
1-10m/min |
|
blanking thickness |
5-50mm |
|
drive power |
1.5kw |
|
heating power |
2.6kw |
|
visual size(L×W×H) |
3650×2500×1800mm | |
|
TY800-1300 hot stamping machine
|
|
|
|
OTR-1300 Sheet material Hot stamping machine
|
|
Performace&use
The machine is mainly used for thermoprinting the both and faces of solid wooden floor and intensified floor.
Technology parameter
|
blanking width |
800-1300mm（two sides） |
|
blanking thickness |
5-30mm |
|
blanking speed |
2-10m/min |
|
drive power |
2.6kw |
|
heating jpower |
1.5kw |
|
total power |
4.3kw |
|
visual size(L×W×H) |
3400×2500×1800mm | |
|
OTR300 Solvent low temp Hot stamping machine
|
Performance&use
This machine is used in the thermoprinting of various kinds of exquisite patterns on PVC indoor wall-skirting board,plasticdoor,low-foaming board,pressed multi-ply board,ane fibreboard etc.
Major features
The machine uses static elimination,cleaning,glue coating,pneumatic pressuring and heat-resistant silicon roller thermoprinting.lt features reliable and stable operation,low noise,free,speed regulation and easy operation.
Technology parameter
|
blanking width |
300mm |
|
blanking speed |
1-10m/min |
|
blanking thickness |
2-40mm |
|
total power |
5.5kw |
|
weight |
1200kg |
|
visual size(L×W×H) |
4000×1200×1900mm | |
|
OTR-4100/6100 Deformed Hot Stamping machine
|
Performance&use
The machine is used in the thermo printing and glazing of various wood grains and decorative patterns on PVC boards,wooden floors,foaming boards,wallskirting boards etc..
Major features
The machine uses pneumatic pressing technique to regulate and control the printing of heatresistant.lt enables change printing angle freely and unwinding & winding automatically.Speed regulating electric motor controls the sheeting returning speed and synchronize it with the printing speed.
Technology parameter
|
blanking width |
100mm |
|
blanking speed |
0-10m/min |
|
blanking thickness |
5-100mm |
|
total power |
12kw |
|
weight |
1800kg |
|
visual size(L×W×H) |
74000×750×2000mm | |
Printing and lamination machine
